JCB Machine

How to Inspect Your JCB Machine Before and After Operations?

When working at a construction site, the JCB machine operators need to inspect their equipment properly to ensure the safety of the workers and maintenance of the costly machines. This results in faster and optimum performances as well. You need to follow a proper procedure and prepare a checklist for heavy inspection before and after every application. It is an essential part of preventive maintenance. Remember, every JCB machine has unique parts, functionalities, and specifications. Hence, you should follow the operator’s manual provided with the machine for individual recommendations. At the same time, prefer buying JCB spares from a reliable manufacturer to ensure durability of your machine. Here are the important points to be checked when inspecting this equipment:

1. Look Under the Machine:

You must check under the machine to ensure it has no visible signs of leakage or any pool of liquid accumulated beneath. If you find any of these, it is important to identify the source and get it rectified immediately. Here, you should also check the undercarriage, rims, and tyres of the machine for accumulation of debris, dirt, wear, or any other type of visible damage. The wear and tear in the spare parts can pose severe safety challenges and affect the performance of your JCB machine.

2. Check the Fluid Levels:

Always ensure that the machine has sufficient engine oil, coolant, hydraulic oil, diesel exhaust fuel, diesel, and other fluids required for running the machine properly without any risk of costly damages occurring to it.

3. Check the Small Components:

JCB Machine

There are some small but very important components like fans, belts, and alternators that must be regularly inspected to reduce machine downtime and costly repairs. Check the greasing points and high-friction areas to prevent undue damage to the machine. There can be some serious problems resulting from unaddressed filter issues. Hence, you should also take a close look at the filters installed in your machine. If any problem exists, prefer buying high-quality JCB spares for immediate replacement.

4. Check Connections and Attachments:

You should carefully check the hydraulic connections and coupling structure of your JCB machine. Do not forget to release the pressure when detaching the attachments from the machine. Also, pay attention to the buckets, rippers, and other ground tools to check for breakage or damages. Any issues in these parts can largely hamper the productivity and safety of the machine.

5. Check the Controls and Indicators:

Also, make sure that the operator controls and warning lights are working properly on your JCB equipment. Take a look at the backup alarm and rear-view mirrors to maintain maximum visibility during the operations.

Always check the full structure of machine to ensure there is no breakage, damage or wear in it. Prefer replacing the faulty parts with reliable spares.

Leave a Reply

Your email address will not be published. Required fields are marked *