ROBOT STEEL BUSH
Steel bush is a plain bearing. It should have all requirements of a good bearing. Steel bush is generally used along with pivot pin and where pivotal thrust load is applied.
Robot brand steel bush is a forged one. Forging contribute to higher strength and better grain sizes. Material used is of SAE (American) specification, which enables the product to achieve optimum metallurgical and heat treatment parameters.
Bush dimensions are made on CNC turning centre leaving a grinding allowance on OD for finishing and fine knurling on I.D. knurling pattern contributes enough grease retention for lubrication. Necessary grooves for grease supply are incorporated. Holes for grease nipple are also provided. After machining completing, bush in case hardened to the desired drawing parameters. Bush is then subjected to shot blasting and finally OD in ground to three triangle finish and specified diameter with micron tolerance. Remember robot product is comparable to any world no. 1 product
LOCAL STEEL BUSH
Dose not stand necessary load – premature failure, fitment problem, crack problem.
Knurling not provided oil groove not made and holes are not drilled. As a result of above all, pin and bush get heated in absence of grease distribution. Consequence – failure and damage.
Scrap pipe is used, machined on ordinary lathe, no control on dimensions and heat treatment can crack wear easily and pre – maturely.
Robot India is the leading JCB Spare parts manufacturers approved in India by world renowned “TUV SOD certification” body. There is no other JCB spare part supplier in India that has attained this stature. The company offers spare parts that are manufactured by their experienced professionals by making use of cutting edge technologies. All important JCB parts required in replacement market are manufactured in state of the art Robot factories. Correct fitments, specific raw material used as per product requirements, proper heat treatment and dimensional accuracy are some of the main features of there products.